Comunique-se com o fornecedor? fornecedor
Watson Lin Mr. Watson Lin
O que posso fazer por você?
conversar Agora Fornecedor
 Número De Telefone:86-0755-86238834 E-mail:sales01@hardceramics.com
Página inicial > Lista de Produto > Cerâmica De Alumina > Eixo de cerâmica de alumina > 99% 99.5% alumina ceramic sharp conical fillet rod
99% 99.5% alumina ceramic sharp conical fillet rod
99% 99.5% alumina ceramic sharp conical fillet rod
99% 99.5% alumina ceramic sharp conical fillet rod
99% 99.5% alumina ceramic sharp conical fillet rod
99% 99.5% alumina ceramic sharp conical fillet rod
  • 99% 99.5% alumina ceramic sharp conical fillet rod
  • 99% 99.5% alumina ceramic sharp conical fillet rod
  • 99% 99.5% alumina ceramic sharp conical fillet rod
  • 99% 99.5% alumina ceramic sharp conical fillet rod
  • 99% 99.5% alumina ceramic sharp conical fillet rod

99% 99.5% alumina ceramic sharp conical fillet rod

    Tipo de pagamento: L/C,T/T,D/P,Paypal,Money Gram,Western Union
    Incoterm: FOB
    Quantidade de pedido mínimo: 1 Piece/Pieces
    Tempo de entrega: 15 dias

Informação básica

Modelo: Al2O3-212

Tipo: Placa

Material: Argila, Alumina Ceramic

Estilo: Ocidental

Uso: Casamento, Presente Empresarial, Uso diário, Decoração de jardim, Decoração do lar

Característica: chinês

Em processamento: Casting

Cor: Branco

Forma: Volta

Era: Moderno

Decoração de superfície: Glazed

Color: White/Ivory

Size: Customized

Application: Machinery, Industry, Medical, Aerospace Etc.

Additional Info

Pacote: Customized

marca: Hard

transporte: Ocean,Land,Air

Lugar de origem: Guangdong,China

Habilidade da fonte: 1,000,000 pcs/Month

Certificados : SGS

porta: Shenzhen

Descrição do produto

99% 99.5% alumina ceramic sharp conical fillet rod

Reputation depends on quality, quality comes from Hard!


Alumina Ceramic:

The alumina powder entering the plant is prepared into a powder material according to different product requirements and different molding processes. The particle size of the powder is less than 1 μm. If the purity of the alumina is 99.99%, the high-purity alumina ceramic product needs to be ultra-finely pulverized and the particle size distribution is uniform. When extrusion molding or injection molding is used, a binder and a plasticizer are introduced into the powder. Generally, a thermoplastic plastic or resin organic binder having a weight ratio of 10-30% should be at a temperature of 150-200 with the alumina powder. Mix evenly underneath to facilitate the molding operation. The powder raw material formed by the hot pressing process does not need to be added with a binder. If semi-automatic or fully automatic dry pressing is used, there is a special process requirement for the powder. It is necessary to spray the granulation method to treat the powder to make it spherical, so as to improve the fluidity of the powder and facilitate the automatic filling of the molding. wall. In addition, in order to reduce the friction between the powder and the mold wall, it is necessary to add 1 to 2% of a lubricant such as stearic acid and a binder PVA.

properties:

High hardness, high strength, wear resistance, corrosion resistance, high temperacture (1600°), good thermal diffusivity, good insulativity, low cost etc.

ceramic pin

Data Sheet↓

Color: White/Ivory
Density: 3.9g/cm3
Alumina Content: 96% 99% 99.5%
Gas permeability: 0
Water Absorption: 0
MONS' Hardness: 82
Vickers Hardness (Hv50): 15.7(1600) Gpa(Kg/mm²)
Flexural Strength(20°C): 330Mpa
Compressive Strength(20°C): 2000Mpa
Fracture Toughness (20°C): 4 MPam1/2
Thermal Conductivity(20°C): 27.5W(m.K)
Thermal Expansion Coefficient: 7.6 10-6/°C

Thermal Shock Resistance: 200 △T°C

Maximum use temperature 1650°C

Dielectric Strength: >10 KV/mm

Dielectric Constant: 9.1er

Dielectric Loss Angle(1MHz): 0.0002-0.0003

Volume Resistivity(20°C): >1014Ω.cm


Application industry: Machinery, electronic, chemical, petroleum etc.
Specific application: Electrical ceramic substrate, plunger, sealing ring etc.




Why Choose Us?
1.12 years of professional production industrial ceramics factory
2.High quality products with low price
3.High precision parts with lowest tolerance
4.Short time for production
5.Has a group of experienced, professional and efficient R&D team
6.Has a good reputation in China and abroad.

7.MOQ is not limited, small quantity is welcome.

8.Vigorous team and good after-sales service


Products Show

alumina ceramics



FAQ

Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.

Grupo de Produto : Cerâmica De Alumina > Eixo de cerâmica de alumina

Enviar e-mail para este fornecedor
  • Mr. Watson Lin
  • Sua mensagem deve estar entre 20-8000 caracteres

Lista de produtos relacionados

Casa

Phone

Skype

Inquérito